TM 10-1670-299-20&P
TO 14D1-2-470-2
NAVAIR 13-1-41
(2) Replacement of cord loop "B" (5).
(a) Carefully cut and remove stitching (6) that secures the 1-inch wide fixed web keeper (7) to the
harness. Cut replacement Type IV nylon web keeper (7) the length of the removed keeper and sear ends as described in
paragraph 2-13.
(b) Carefully cut and remove stitching (8) that secures the loop (5) to the harness in two places (6) and
discard. Cut a 6-1/2 inch length of Type III, OD-7 nylon cord and sear ends as described in paragraph 2-13.
(c) Position nylon cord (5) as in original location and stitch with double-throw zigzag or straight zigzag
stitching (8), two places (6) forming loop. Use size E thread, 7 to 11 stitches per inch, and a type ZZ sewing machine.
(d) Position web keeper (7) 2-1/4 inches from outside edge of loop (5) as in original construction. The
two plies of web keeper must be located on the loop side of the harness. Stitch with double box X stitch pattern (6). Use
size FF thread, 7 to 9 stitches per inch, and a type MD sewing machine.
(3) Replacement of cord loop "C" (9).
(a) Carefully cut and remove stitching (10) that secures the cross strap (11) to the harness.
(b) Carefully cut and remove stitching (12) that secures the loop (9) to the harness in two places (12)
and discard. Cut a 5-1/4 inch length of Type III, red nylon cord and sear ends.
(c) Position nylon cord (9) as in original location and stitch with double-throw zigzag or single-throw
zigzag stitching (12), two places forming loop (9). Use size E thread, 7 to 11 stitches per inch, and a type ZZ sewing
machine.
(d) Position cross strap (11) 7/8 inch from outside edge of loop with harness strap sandwiched between
superimposed cross straps as in original construction and stitch with double box X stitch pattern. Use size 3 thread, 6 to
8 stitches per inch, and a type HD sewing machine.
2-67
