2-5. Initial Programming, Checks,and Self Test - Continued
a.
T/C Programming - Continued
(11) Press the M (Manual) switch (14). The selected AGU ID switch (9)
will be identified by a blinking red LED.
NOTE
Only AGU's corresponding to AGU ID switches identified by a blinking
red LED will accept manual commands.
b.
Timer Programming.
(1)
Set the rotary switch (1) to PRGM.
(2)
Press AUX 1 (TMR CLR) (15) followed by AUX 3 (TMR SET) (16).
The CHANNEL display (4) displays 01 and the MIN LED (17)
illuminates. This indicates that the display is indicating minutes.
The TMR LED (18) will also be illuminated and blinking.
2-40
