TM 10-1670-327-23&P
0009 00
Table 1. Preventive Maintenance Checks and Services for MC-6 continued.
ITEM
INTERVAL
ITEM TO BE
PROCEDURE
EQUIPMENT NOT READY/
NO.
CHECKED OR
AVAILABLE IF:
SERVICED
09
Before
Universal Static Static line webbing with minor
After
Line- Continued abrasions are serviceable. Minor
Abrasions (figure 1) are visible on the
surface of the USL webbing and will
appear to look "fuzzy".
Figure 1. Minor Abrasion.
Presence of major abrasions.
Static line webbing with major
abrasions are unserviceable. Major
abrasions (figure 2) are visible when
inner core fibers are pulled through the
surface of the webbing.
Figure 2. Major Abrasion.
Sleeve and Buffer. Inspect for loose or Presence of broken stitching, holes,
broken stitching, holes, tears, burns or tears, burns or frays.
frays. Inspect entire portion of static
line covered by sleeve.
Curved Pins. Inspect for rust, burrs,
Presence of rust, burrs, corrosion,
corrosion, bent or twisted pins.
or bent or twisted pins.
Presence of excessive wear, rust,
Snap Hook. Inspect for proper
burrs, corrosion, and cracks. Snap
operation, excessive wear, rust, burrs,
hook doesn't operate properly.
corrosion, and cracks.
Presence of loose or broken
Webbing. Inspect for loose or broken
10
Before
Extension,
stitching, holes, line extension tears,
Universal Static stitching, holes, line extension tears,
After
burns or frays.
burns or frays.
Line, (USL)
Static line webbing with minor
abrasions are serviceable. Minor
Abrasions (figure 3) are visible on the
surface of the USL webbing and will
appear to look "fuzzy".
Figure 3. Minor Abrasion.
0009 00-9
