TM 10-1670-327-23&P
0009 00
Table 1. Preventive Maintenance Checks and Services for MC-6 continued.
ITEM
INTERVAL
ITEM TO BE
PROCEDURE
EQUIPMENT NOT READY/
NO.
CHECKED OR
AVAILABLE IF:
SERVICED
Presence of holes, cuts, frays,
Extractor/(Pilot Chute). Inspect the
Before
Reserve
tears, burns, and loose or broken
extractor for holes, cuts, frays, tears,
After
Canopy-
stitching.
burns, and loose or broken stitching.
Continued
Skirt Hesitator Ties. Inspect for burns, Presence of burns, cuts, breaks,
and loose or broken stitching
cuts, breaks, and loose or broken
stitching.
Presence of burrs, rough spots,
Connector Link. Inspect for burrs,
corrosion, cracks and bends.
rough spots, corrosion, cracks and
bends.
Presence of dampness, dirt, foreign
Gore Sections. Inspect the gore
material, holes, cuts, snags, tears,
sections for dampness, dirt, foreign
frays, burns, loose or broken
material, holes, cuts, snags, tears,
stitching, and marred or illegible
frays, burns, loose or broken stitching,
markings.
and marred or illegible markings.
Information Data Block. Inspect for
Data illegible.
legibility of data.
Main Seams. Inspect for loose and
Presence of loose and broken
broken stitching, holes and tears.
stitching, holes and tears.
Presence of loose or broken
Apex Vent Bridle Loops. Inspect for
stitching, holes, tears, frays, burns
loose or broken stitching, holes, tears,
and cuts.
frays, burns and cuts.
Presence of loose or broken
Canopy Scoop. Inspect for loose or
stitching, frays, tears, burns, and
broken stitching, frays, tears, burns,
cuts.
and cuts.
Suspension Lines. Inspect for loose or Presence of loose or broken
broken stitching, broken lines, broken stitching, broken lines, broken core
cords, frays, burns, and tears.
core cords, frays, burns, and tears.
Presence of loose or broken
Ejector Spring. Inspect for loose or
stitching, frays, tears, burns, and
broken stitching, frays, tears, burns,
cuts. Presence of rust, burrs, rough
and cuts. Inspect for rust, burrs, rough
spots, corrosion, cracks, distorted or
spots, corrosion, cracks, distorted or
broken springs.
broken springs
Presence of loose or broken
03
Risers, Main
Risers. Inspect for loose or broken
stitching and tacking, burns, frays,
stitching and tacking, burns, frays,
tears, deterioration, and marred (or
tears, deterioration, and marred (or
illegible) markings.
illegible) markings.
Canopy Release Male Fittings. Inspect Presence of corrosion, rough spots,
for corrosion, rough spots, bends,
bends, cracks.
cracks.
Log Record Pocket. Inspect for loose
Presence of loose or broken
or broken stitching.
stitching.
Identification Tape. Inspect for loose or Blue confluence wrap loose or
missing blue confluence wrap.
missing.
0009 00-5
