TM 10-1670-327-23&P
0015 00
ATTACH THE PACK TRAY AND HARNESS TO THE MAIN RISERS
NOTE
If pack tray and harness are separate from the main canopy, refer to WP 0006 00 for
instructions on attaching the harness to the pack tray.
1. Layout the pack tray and harness (figure 12, item 1) so that the adjustment points are facing down.
2. Locate the canopy release assembly (figure 12, item 2) at the shoulder of the harness assemblies
(figure 12, item 3). Open the canopy release assembly cover plate (figure 12, item 4) by pulling
downwards on the cover plate (figure 12, item 5).
3. Locate and remove the operating lug by depressing the two operating lug release levers (figure 12,
item 6).
1
6
5
2
4
3
Figure 12. Laying Out Pack Tray and Harness; Opening Canopy Release Assembly Cover Plate.
0015 00-11
