TM 10-1670-327-23&P
0015 00
CHECK CONTROL LINES AND ENSURE PROPER ROUTING
1. Trace the control lines (figure 15, item 1) from the toggle (figure 15, item 2) to the connector link
(figure 15, item 3) on the inside of the risers (figure 15, item 4), ensuring that the control lines run
from the toggle (figure 15, item 2) through the guide ring (figure 15, item 5) and routed through the
control line channels (figure 15, item 6).
3
6
5
2
4
1
Figure 15. Tracing Control Lines.
2. With the control lines routed to the inside of the connector links trace both control lines (figure 16,
item 1) up to the point where they are connected to the cascade lines (figure 16, item 2) inside the
canopy. Ensure that the control lines and the upper control line assembly run free and clear from the
attachment points (figure 16, item 3) on the canopy to the skirt.
2
3
1
Figure 16. Ensuring Control Lines and Cascades Run Free and Clear.
3. Rigger check number 1. Check suspension lines for proper layout (figure 17, item 1). Left group
should have line number 1 (figure 17, item 2) on the inside of the top connector link (figure 17, item
3) and line number 14 (figure 17, item 4) on the inside of the bottom connector link. Right group
should have line number 28 (figure 17, item 5) on inside top and line number 15 (figure 17, item 6)
on the inside of the bottom connector link (figure 17, item 7).
0015 00-14
