TM 10-1670-327-23&P
0016 00
8. Form 3 additional "free" stows (not attached to the pack tray).
9. Form a bight approximately 12 inches from the last stowed line and place a small retainer band
(figure 23, item 1) 1-2 inches from the end of the bight.
10. Form another bight approximately the same distance and place another small retainer band (figure
23, item 2) in the same manner.
1
2
Figure 23. Forming Bight and Placing Retainer Band.
11. Remove the line separator.
12. Remove the slack from the skirt assist lines as follows:
3
a. Grasp lines (figure 24, item 1) at lower lateral band and slide slack toward the bartack (figure
24, item 2) at the point where the lines cascade forming a bight.
1
2
Figure 24. Grasping Lines and Removing Slack.
0016 00-19
