TM 10-1670-327-23&P
0016 00
9. Lay the pack tray (figure 50, item 1) down.
10. Place the lower pull up cord (figure 50, item 2) through the lower flap grommet (rigger view) (figure
50, item 3). Use the T-bar to close then insert temporary pin (figure 50, item 4).
1
2
3
Figure 50. Using T-bar To Close Pack Tray and Inserting Temporary Pin.
11. Rotate the pack tray (figure 51, item 1) 180.
12. Place the upper pull up cord (figure 51, item 2) through the upper flap grommet (rigger view) (figure
51, item 3). Utilizing the T-bar (figure 51, item 4), apply pressure until the closing loop is exposed
and insert temporary pin (figure 51, item 5).
2
3
4
1
Figure 51. Inserting Second Temporary Pin.
0016 00-36
