TM 10-1670-327-23&P
0055 00
REPLACE - continued
2. Locate and remove the locking key (figure 2, item 1) by depressing the two protruding lug release
levers (figure 2, item 2).
2
1
Figure 2. Remove The Locking Key.
3. Remove girth-hitch knot from slot on locking key (figure 3, item 1) and remove soft loop (figure 3,
item 2) from locking key (figure 3, item 1).
2
1
Figure 3. Remove Soft Loop From Locking Key.
4. Pass the soft loop (figure 4, item 4) through the grommet (figure 4, item 5) in the harness main lift
web (figure 4, item 6).
5. Remove soft loop.
0055 00-2
