TM 10-1670-327-23&P
0065 00
REPLACE - continued
2. Route one end of a 12-inch length of Type I, 1/4-inch, cotton webbing, one turn single, through one
end of the skirt hesitator line attaching loop, through the looped end of the skirt hesitator line, and
back through skirt hesitator line attaching loop.
Install Skirt Hesitator Ties
1. Starting with line 1, follow the inside radial seam until you run into the skirt hesitator line attaching
loop (figure 1, item 2).
2. Route one end of a 12-inch length of one turn single, Type I, 1/4-inch, cotton webbing through one
end of the skirt hesitator line attaching loop, through the looped end of the skirt hesitator line, and
back through skirt hesitator line attaching loop.
3. Secure the ends of the cotton webbing (figure 1, item 1), over the skirt hesitator line attaching loop
(figure 1, item 2), with a surgeon's knot and locking knot.
4. Trim the excess to within 1/2-inch.
5. Repeat steps 1 through 3 with the additional 19 suspension lines.
1
2
2
1
Figure 1. Install Skirt Hesitator Ties.
END OF WORK PACKAGE
0065 00-2
