TM 10-1670-327-23&P
UNIT MAINTENANCE
MC-6 PERSONNEL PARACHUTE SYSTEM
NSN 1670-01-527-7537
RESERVE PACK TRAY FASTENER TAPE HOOK
INSPECT, REPAIR, REPLACE
INITIAL SETUP:
Tools
Personnel Required
Sewing Machine, Medium Duty (Item 59, WP
92R (10) Parachute Rigger
Knife, Hot, Metal (Item 27, WP 0097 00)
Stitch Removal Tool (Item 62, WP 0097 00)
Shears (Item 61, WP 0097 00)
Tape Measure (Item 64, WP 0097 00)
Materials/Parts
Equipment Condition
Fastener Tape, Hook 1-1/2-inch wide, Type II,
Lay out on packing table or other suitable area.
Class 1 (Item 24, WP 0109 00)
Thread, Nylon, Size E (Item 51, WP 0109 00)
INSPECT
Inspect fastener hook tape to ensure that there is no missing stitching, holes or worn hook tape.
REPAIR
Repair broken stitching by using size E nylon thread over the original stitching.
NOTE
During repair, ensure that the elastic riser stow bar is not sewn over.
REPLACE
Replace Hook tape
1. Remove damaged hook tape by removing stitching from the reserve pack tray. Ensure when
removing the stitching not to cut the reserve pack tray, if any holes or any other tear are in the pack
tray it must be replaced with a new one.
2. Cut a 11-1/4-inch length from a new roll of hook tape.
3. Put into place as in the original construction and sew into place using size E nylon thread. Ensure no
stitches are placed into the elastic riser stow bar loop.
END OF WORK PACKAGE
0079 00-1/(2 Blank)
