TM 10-1670-327-23&P
0089 00
REPLACE - continued
4. Using a zig-zag sewing machine and size E nylon thread, begin sewing on the vent line at least 1/2-
inch above the vent mark. Continue sewing to within 2 inches from the hot cut end. Scissor cut the
vent line at the mark 1-inch from the hot cut end. Continue sewing over the now scissor cut end by at
least 1/2-inch (figure 1).
5. Thread the free end of the vent line by tracing it with one of the adjacent lines to the opposite side
without twists.
6. Align the mark with the top of the vent band.
7. Using a zig-zag sewing machine and size E nylon thread, begin sewing on the vent line at least 1/2-
inch above the vent mark. Continue sewing to within 2 inches from the hot cut end. Scissor cut the
vent line at the mark 1-inch from the hot cut end. Continue sewing over the now scissor cut end by at
least 1/2-inch.
END OF WORK PACKAGE
0089 00-2
