MWO 10-1670-293-20-1
c. Mark stow bar and stitching locations as follows (figure 2): Mark bottom inside comer 3' up from the pack closing
loop and 3-1/4" in from the edge of the pack tray. Mark top inside comer 6-1/2' up from pack closing loop and 6" in from
the edge of the pack tray. Draw a straight line connecting the two points. Mark 3/16" in from each end point and 1-3/8"
in from these points to locate the four rows of stitching. An alternative method is to use the template shown in figure 3 to
locate the stow bar and stitching. The template dimensions are shown in figure 4.
Figure 2.
4
