TM 10-1670-265-12&P
T.O. 13C7-1-12
4-21. G-12E - SERVICE (Cont)
4-21
PACKING (Cont.)
5.
Applying tension.
a.
Reconnect the canopy bridle loop to the stationary post.
b.
Insure that the two risers are attached to the body of a 3/4-inch shackle (clevis) and the applicable nut and
screw are installed on the clevis.
c.
Connect the 3/4-inch clevis to a tension device and apply tension.
NOTE
A tension jack, chain hoist, power winch, or a vehicle may be used as a tension device when
applying tension to the parachute canopy.
GO TO NEXT PAGE
4-49
