TM 10-1670-268-20&P 0004 00
0004 00-28
8. Assembling the Clevis Assembly. The clevis assembly is a component of the type V and dual row
airdrop platform used in all modes of airdrop. The clevis assembly consists of a clevis (1), one 7/16-
inch x 2 31/32-inch hex head bolt (2), spacer (3), one 7/16-inch flat washer (4) and a 7/16-inch hex lock
nut (5).
a. The clevis assembly is secured around a side rail bushing (6) and may be used in pairs on a side
rail bushing. It is also secured around a spacer installed within a tandem link assembly. Both
applications of the clevis assembly are illustrated below.
NOTE
If a load binder hook is attached directly to the clevis, do not replace
the spacer.
NOTE
Each tandem link assembly has space for four clevis assemblies.
b. Install the clevis assembly. Using a 5/8-inch and an 11/16-inch socket or wrench, remove the clevis
hex lock nut, washer, hex head bolt, and spacer and hook the clevis around a bushing bolted to
the side rail.
3 1/2"
1
5
4
3
2
6
