TM 10-1670-268-20&P 0004 00
0004 00-30
c. Disassembly of Outrigger Foot. Two personnel are required for this task.
(1)
Remove quick release pin at end of mast.
(2)
Remove shaft (bracket, eye, non-rotating shaft) to release foot.
d. Disassembly of Outrigger Mast. Two personnel are required for this task.
(1)
Remove quick release pin at pivot end of mast.
(2)
Remove shaft pivot pin.
(3)
Retract knob handles to release latch pins and remove mast from link, using handle
provided.
e. Disassembly of Weldment. Two personnel are required for this task.
(1)
Using a ¾-inch socket or wrench, loosen side rail bolts (numbers 27-36).
(2)
Using a ¾-inch socket or wrench, loosen the four ½-inch diameter x 4 ½-inch cap bolts
fastening link to weldment.
(3)
Using a 9/16-inch socket or wrench, remove the 3/8-inch diameter x 4-inch bolts fastening
weldment to platform.
(4)
Remove ½-inch diameter x 4 ½-inch cap bolts fasting link to weldment. Remove
weldment.
KNOB HANDLES
RETRACTED
PLATFORM PANEL
WELDMENT MOUNTING
HOLE
