TM 10-1670-269-23&P
0013 00
0013 00-21
5. Center compressed ejector spring on top of deployment pouch.
NOTE
Ensure the upper lateral band is directly under the centered
compressed ejector spring.
6. Rotate the pack one-quarter turn clockwise. Ensure packing weight remains under the pack tray.
7. S-fold the remaining deployment line (2 to 3-inch folds) to the second black line and insert between
the spring coil. Insure that both black lines are visible.
NOTE
Stow the bridle line that is between the two curved pins under the
compressed spring.
8. Pick up the deployment weight at the bridle line end and place the deployment weight under the
ejector spring compression rods. Insure the deployment weight is centered on top of the spring.
Tuck the excess bridle under the deployment weight.
Bridle Line
Ejector Spring
Compression
Rods
Black Line
Ejection Spring
Deployment Weight
Pilot Chute
Compression
Rods
