TM 10-1670-272-23&P                                                         0006 00 0006 00-5 Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued B – Before D – During A - After INTERVAL ITEM NO. B D A ITEM TO BE INSPECTED PROCEDURES 04 Pack Tray - Continued Static Line Slack Retainer.  Inspect for loose or broken stitches, burns, frays, tears and elasticity. Waistband & Waistband Extension.  Inspect for loose or broken stitches, burns, frays and tears; and check metal adjuster for rust, burrs, or corrosion. 05 Deployment Bag Deployment Bag.   Inspect all webbing and tapes for loose or broken stitching. Main Panel.  Inspect for holes and tears, loose and broken stitching. Stow Loops and Reinforcement Panel.  Inspect for loose or broken stitching, holes, tears, burns or frays. Edge Reinforcement Webbing.  Inspect for loose and broken stitching, holes, tears, burns or frays. Side Flaps.  Inspect for loose and broken stitching, holes, tears, burns or frays. Locking Stow Panel.  Inspect for loose and broken stitching, holes, tears, burns or frays. Locking Stow Loop Hoods.  Inspect for loose or broken stitching, holes, tears, burns or frays. Closing & Locking Stow Loops.  Inspect for loose or broken stitching, holes, tears, burns, or frays. Suspension Line Protection Cover.  Inspect for loose or broken stitching, holes, tears, burns, frays and illegibility of markings. Cover Tiedown Loops.  Inspect for loose or broken stitching, holes, tears, burns or frays. Connector Link Tie Loops.  Inspect for loose or broken stitching, holes, tears, burns or frays.