ARMY TM 10-1670-276-23&P
AIR FORCE T.O. 13C5-29-2
NAVY NAVAIR 13-1-29
(2) Right riser strap. Replace a right riser strap using the procedures In paragraph (1), above. However, details for
forming the parachute inspection data pocket (log record pocket) do not apply to the right riser strap in addition, only the
riser identification markings will be stenciled on the right riser strap. The stenciling will be performed according to
original stenciling details, using the procedures in paragraph 2-19.
(3) Spreader
(a) Cut and remove the stitching which secures the spreader webbing around each of the riser straps. Remove
the spreader from the riser assembly by cutting the spreader webbing.
(b) Cut a 31-3/4-inch length of 1-23/32-inch-wide, type VIII nylon webbing and sear the ends.
(c) Fold the webbing length around each of the riser straps according to original construction details and make a
1 3/4-inch overlap of the webbing ends at the center between the two riser straps. Secure the spreader
webbing plies together and also attach the webbing in the original location on each riser strap by stitching
according to the details in figure 2-62. Using the same details, secure the overlapped spreader webbing
ends by stitching a 1 1/2-inch-wide single X-box-stitch formation. Stitching will be made with a heavy-duty
sewing machine, using size 3 nylon thread, 5 to 8 stitches per inch.
2-95
