ARMY TM 10-1670-276-23&P
AIR FORCE T.O. 13C5-29-2
NAVY NAVAIR 13-1-29
2-31. Riser.
This task covers:
a. Repair
b. Replacement
Tools:
Materials/Parts (cont):
Knife, Item 5, Appendix B
Webbing, Nylon, Type VIII, Item 44, Appendix D
Knife, Hot Metal, Item 6, Appendix B
Webbing, Cotton, Type VIII, Item 43, Appendix D
Pot, Melting, Item 11, Appendix B
Wax, Paraffin, Item 40, Appendix D
Sewing Machine, Heavy Duty, Item 15, Appendix B
Tacking Needle, Item 8, Appendix B
Equipment Condition:
Yardstick, Item 20, Appendix B
Inspected (paragraph 2-9)
Cleaned (paragraph 2-12)
Materials/Parts:
Unpacked, laid flat on repair table
Beeswax, Item 2, Appendix D
Pencil, Marking Aid, Item 21/22, Appendix D
Tape, Pressure-Sensitive, 1-inch Wide, ltem 29,
Appendix D
Thread, Nylon, Size 3, Item 36/37, Appendix D
Webbing, Cotton, 1/4 inch Wide, Item 41, Appendix D
a. Repair.
(1) Stitching. Stitch and restitch with size 3 nylon thread which matches the color of the original stitching, when
possible. Lock all straight stitching by backstitching at least 1/2 inch. Restitch directly over the original
stitching, following the original stitch pattern as closely as possible.
(2) Retaping attachment loop. Before retaping, insure remains of all original tape have been removed. Retape
rolled portion of suspension line attaching loop using five spiral turns of 1-inch wide, type I pressure sensitive
tape (figure 2-59).
(3) Restencil. As required, restencil identification marking using procedures in paragraph 2-19.
2-90
