TM 10-1670-277-23&P 0011 00
0011 00-31
NOTE
Ensure that only the 1-inch connector link with flat screws and the G-14
small clevis are used with the 6-inch connector strap.
3. Attaching the Release Away Static Line to the 28-Foot Deployment Parachute.
a. Route the free end of the static line behind both bag bridle straps and girth hitch the looped end of
static line with grommet facing upward around both deployment bag bridle straps. Ensure that
release line is not wrapped in the girth hitch.
b. Using 1-turn single ½-inch tubular nylon of suitable length, attach the canopy bridle loop to the
release line (tied tightly) with a surgeon’s knot and locking knot and an overhand knot in the running
end. Cut the excess ½-inch tubular nylon, leaving 2-inch ends.
Girth Hitch
Release Away
Static Line
Grommet
Release Line
Release Line
Secured to Bridle
Loop with ½-IN.
Tubular Nylon
