ARMY TM 10-1670-278-23&P
AIR FORCE T.O. 13C5-26-2
NAVY NAVAIR 13-1-27
2-47.
36-Inch-Long Adapter Web Long Buffer.
This task covers:
a. Repair
b. Replace
Tools:
Personnel Required:
Needle, Tacking, Item 6, Appendix B
43E(10) Parachute Rigger
Pot, Melting, Electric, Item 9, Appendix B
Sewing Machine, Light Duty, Item 12,
Equipment Condition:
Appendix B
Yardstick, Item 20, Appendix B
Inspected, Paragraphs 2-9, 2-13
Cleaned, Paragraph 2-12
Laid out on work table
Thread, Waxed, Cotton, Size 8/7, Item 26,
Appendix D
Reference:
Thread, Nylon, Size E, Item 27/28,
Appendix D
Group No. 04, MAC, Section II,
Webbing, Cotton, Type X, Item 36,
Appendix B
Appendix D
a. Repair. Replace broken or loose tacking securing the long buffer in the 5-inch-long single attaching loop by
retacking according to original tacking details using one turn double, ticket No. 8/7 waxed cotton thread at each
tacking point. Secure the tacking with a square knot and locking knot. Trim ends to 112 inch.
b. Replacement. Replace a damaged or missing long buffer in 5-inch-long single attaching loop by fabricating as
follows (figure 2-70):
(1) As required, remove original long buffer by cutting tacking securing buffer within loop.
(2) Cut a 7 314-inch length of 1 3/4-inch-wide, type X cotton webbing and wax ends.
(3) Double webbing length and align ends. Secure aligned ends by stitching two rows of stitching across
webbing width according to details in figure 2-70, using a light duty sewing machine. Stitching will be 7 to 11
stitches per inch using size E nylon thread.
(4) Position formed buffer in original long buffer location and secure buffer to attaching loop webbing by hand
tacking at three points using one turn double, size 8/7 waxed cotton thread at each point. Secure tacking
ends at each tacking point with a square knot and locking knot and trim ends to 112-inch.
2-120
