TM10-1670-286-20
EXTRACTION LINE PANEL PROCEDURES FOR C-17 GLOBEMASTER III 0018 00
STOWING 120/140-FOOT SIX LOOP EXTRACTION LINE TO EXTRACTION
LINE PANEL WITH EXTRACTION LINE BRIDLE ATTACHED
0018 00-3
Figure 2. Extraction Bridle Attached to Two
Extraction Line Panels.
2. Layout.
a. Position Extraction Line Panels on the packing table or suitable surface with stow
loops facing up and running lengthwise (figure 3).
Figure 3. Layout of Two Panels for Stowing
the 120/140-Foot Six Loop Extraction Line.
b. Cut 92 eighteen-inch lengths of type I, ¼-inch cotton webbing. Girth hitch 49 ties to the
right, center and left row of stow loops on the bottom panel. Girth hitch 42 ties to top panel
evenly spaced to the right, center and left row of stow loops.
c. Cut six 24-inch lengths of type I, ¼-inch cotton webbing. Girth hitch 3 ties to the left and
right stow loop rows of the bottom panel using stow loops 1, 6, and 12 (figure 4).
Bottom
Panel
Top Panel
Extraction Bridle
Connector Links (9)
Bridle Attachment
Loop
Upper End of Suitable
Surface
Top Panel
Bottom
Panel
