TM 10-1670-287-23&P
0031 00
0031 00-2
8. Cut a 9-inch piece of 2-inch nylon tape. Measure and fold webbing under 2 ½-inches from each end
forming a 4-inch length.
9. Position the plastic slider stop between the top two layers of the 2-inch webbing.
10. Using a light-duty sewing machine, size E nylon thread and 7 to11 stitches per inch, sew the slider
stop to the previously patched area on the outside of stabilizer ensuring the slider stop is positioned
on the correct side of the vertical 3/8-inch nylon tape (the first two plastic slider stops are on the rear of
the vertical 3/8-inch nylon tape, the last plastic slider stop is to the front of the vertical 3/8-inch nylon
tape). Ensure the 2-inch nylon tape is of equal distance on each side of the vertical 3/8-inch nylon
tape.
11. Obtain an additional 9-inch piece of 2-inch nylon tape from supply stock and fold it in the same
manner as stated in step 8., above.
12. Using a light-duty sewing machine, size E nylon thread and 7 to 11 stitches per inch, sew the 2-inch
nylon tape to the inside of the stabilizer, directly over the 2-inch tape on the outside of the stabilizer.
4-INCHES
