TM 10-1670-293-23&P
0011 00
Change 1
0011 00-46
1. Stowing the standard 15-foot static line.
NOTE
Install the necessary number of rubber bands, on the left and right
outer and inner static line retainer band keepers, with a girth hitch.
Static line stows are secured with two-turns of a rubber band. The
end of each stow must not be longer than 2-inches from the rubber
band. Ensure static line is not twisted.
a. Rotate the pack tray a quarter-turn counterclockwise. Make the first static line
stow to the lower right outer stow bar. Make the second static line stow to the
lower left outer stow bar. Make the third static line stow to the lower right inner
stow bar. Make the fourth static line stow to the lower left inner stow bar. Make
the fifth static line stow to the middle right inner stow bar. Make the sixth static
line stow to the middle left inner stow bar. Make the seventh static line stow to the
upper right inner stow bar. Make the eighth static line stow to the upper left inner
stow bar.
b. Fold remaining static line in half, and rotate it a quarter-turn counterclockwise.
Pass the folded end through the static line slack retainer. After hooking the static
