TM 10-1670-293-23&P
0011 00
0011 00-49
Change 1
b. Secure the snap hook to the upper right outer stow bar. Stow the remaining static
line in the static line slack-retaining loop. Stow the excess under the existing
stows and the bottom of the pack tray protector flap.
NOTE
The girth hitch, attaching the USL extension to the USL must be
centered between the ninth and tenth stows. If necessary, adjust
the previous stows. The end of each stow must not be longer than
2-inches from the rubber band.
3. Stowing the USL and USL extension.
a. Rotate the pack tray a quarter-turn counterclockwise. Make the first static line
stow to the lower right outer stow bar. Make the second static line stow to the lower
left outer stow bar. Make the third static line stow to the lower right outer stow bar.
Make the fourth static line stow to the lower left outer stow bar. Make the fifth static
line stow to the lower right inner stow bar. Make the sixth static line stow to the lower
left inner stow bar. Make the seventh static line stow to the middle right inner stow
bar. Make the eighth static line stow to the middle left inner stow bar. Make the ninth
static line stow to the upper right inner stow bar. Make the tenth static line stow to the
upper left inner stow bar.
Outer Static
Line Stow
Bar
Static Line Slack
Retaining Loop
