TM 10-1670-293-23&P
0011 00
Change 1
0011 00-48
c. After making the static line stows described in step a., above, stow the running
end of the static line as follows:
(1)
Double the remaining static line length and rotate the doubled length one-
quarter turn counterclockwise.
(2)
Connect the static line snap hook to either the static line pack-opening loop
or the pack left-side retainer band keeper.
(3)
Pass the folded end of the static line through the static line slack retainer
(at the pack upper end), under the stowed line (toward the pack lower end),
and draw the doubled line taut.
(4)
Insert the static line folded-end under the pack lower-end flap.
2. Stowing the USL.
a. Rotate the pack tray a quarter-turn counterclockwise. Make the first static line
stow to the lower right outer stow bar. Make the second static line stow to the
lower left outer stow bar. Make the third static line stow to the lower right inner
stow bar. Make the fourth static line stow to the lower left inner stow bar. Make
the fifth static line stow to the middle right inner stow bar. Make the sixth static line
stow to the middle left inner stow bar. Make the seventh static line stow to the
upper right inner stow bar. Make the eighth static line stow to the upper left inner
stow bar.
