TM 10-1670-293-23&P     0006 00 0006 00-3 Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued. B – Before D – During A – After INTERVAL ITEM NO. B D A ITEM TO BE INSPECTED PROCEDURES 01 * * Canopy - Continued Informational Data Block.  Inspect for illegibility of data. Radial Seams.  Inspect for loose and broken stitching, holes and tears. Radial Tapes.  Inspect for loose or broken stitching, holes, tears, and lack of freedom within radial seam. V-Tabs.  Inspect for loose or broken stitching, frays, tears, burns, and cuts. Pocket Bands.  Inspect for cuts, frays, tears, burns, and loose or broken stitching. Lower Lateral Band.  Inspect for loose or broken stitching, rips, snags, and burns. Anti-Inversion Net.  Check for cuts, broken cords, and loose or broken stitching. Lines.  Inspect for loose or broken stitching, broken lines, broken core cords, frays, burns, and tears. Connector Links.  Inspect for rust, burrs, rough spots, corrosion, cracks, foreign material, loose or missing screws, stripped threads, and ends not locked. 02 * * Risers Risers.  Inspect for loose or broken stitching and tacking, burns, frays, tears, deterioration, and marred (or illegible) markings. Canopy Release Male Fittings.  Inspect for corrosion, rough spots, bends, and cracks.   Log Record Pocket.  Inspect for loose or broken stitching, and loose or missing pressure sensitive tape. Identification Tape.  Inspect for loose or missing green pressure sensitive adhesive tape.