TM 10-1670-293-23&P     0006 00 0006 00-5 Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued. B – Before D – During A - After INTERVAL ITEM NO. B D A ITEM TO BE INSPECTED PROCEDURES 05 * * Deployment Bag Inspect all webbing and tapes for loose or broken stitching. Main Panel.  Inspect for holes and tears, loose and broken stitching   Stow Loops and Reinforcement Panel.  Inspect for loose or broken stitching, holes, tears, burns or frays. Edge Reinforcement Webbing.  Inspect for loose and broken stitching, holes, tears, burns or frays. Side Flaps.  Inspect for loose and broken stitching, holes, tears, burns or frays. Locking Stow Panel.  Inspect for loose and broken stitching, holes, tears, burns or frays. Locking Stow Loop Hoods.  Inspect for loose or broken stitching, holes, tears, burns or frays. Suspension Line Protection Cover.  Inspect for loose or broken stitching, holes, tears, burns, frays and illegibility of markings. Cover Tiedown Loops.  Inspect for loose or broken stitching, holes, tears, burns or frays. Connector Link Tie Loops.  Inspect for loose or broken stitching, holes, tears, burns or frays. 06 * * Standard Static Line & Static Line Extension Webbing.  Inspect for loose or broken stitching, holes, line extension tears, burns or frays. Sleeve and Buffer.  Inspect for loose or broken stitching, holes, tears, burns or frays.  Inspect entire portion of static line covered by sleeve. Pack Opening Loop.  Inspect for loose or broken stitching, burns, tears or frays.