TM 10-1670-201-23
T.O. 13C-1-41
NAVAIR 13-1-17
Figure 1-1. Installing attachment tie on a parachute log record, typical.
continued on the inside of the black cover (B), if
c. Accomplishing a Log Record. Upon completion
necessary.
of the first technical/rigger-type inspection, the individual
performing the inspection will initially prepare a log
1. Serial number.
Enter the
record for an individual parachute or applicable type
parachute canopy assembly serial number.
parachute harness and accomplish subsequent record
NOTE
entries using the following procedures, as applicable:
A parachute canopy serial number is
NOTE
recorded in a log record as a method
Log record book entries will be made
of establishing control for mainten-
with a suitable type blue or black
ance, EIR (Equipment Improvement
marking device that cannot be
Report) and QDR (Quality Deficiency
erased.
Report) documentation, and to
(1) Parachute log record.
insure the correct original record is
reattached should the record become
(a) Inside front cover.
Using the
detached. A canopy serial number
information provided on the parachute canopy data
block, make the following entries on the inside front
will not be used for property
cover of the log record (A, fig. 1-2). Entries may be
accountability, except in test projects
or other special instances.
Change 4
1-3
