ARMY TM 10-1670-282-23&P
AIR FORCE T.O. 13C5-30-2
NAVY NAVAIR 13-1-33
(f)
Secure the opposite cord running end to the top of the safety pin using the procedure in (d) above.
(2)
Replacing a static line clevis safety pin.
(a) If applicable, remove the original safety pin from the static line clevis by untying the retaining cord running
end which secures the pin to the clevis.
(b) Cut a 5-inch length of 0.080-inch diameter corrosion resisting steel wire.
(c)
Using the cut wire length, form a 3 1/8-inch long static line clevis safety pin according to the details
shown in figure 2-67.
(d) Attach the formed safety pin to the static line clevis using the original clevis pin retaining cord running end
and the procedures in (1)(d) above.
b.
Replace. Replace an unserviceable or missing static line clevis with a serviceable item from stock.
Figure 2-67. Static Line Clevis Safety Pin Construction.
2-109
