TM 10-1670-287-23&P
0046 00
UNIT MAINTENANCE
MC-4 RAM AIR FREE-FALL PERSONNEL PARACHUTE SYSTEM
AR2 RIPCORD RELEASE POCKET (PADDED)
0046 00-1
THIS TASK COVERS:
Replace (Mounting)
INITIAL SETUP:
Tools
Sewing Machine, Medium-Duty (Table 1, WP 0015 00)
Sewing Machine, Zig-Zag (Table 1, WP 0015 00)
Stitch Removal Tool (Item 40, WP 0063 00)
Material/Parts
Pocket, Assembly (Padded), AR2 (Item 15, WP 0065 00)
Thread, Nylon, Size E (Item 43/44, WP 0076 00)
Thread, Nylon, Size FF (Item 42, WP0076 00)
Personnel Required
92R (10) Parachute Rigger
Equipment Condition
Layout on packing table or other
suitable area.
REPLACE (Mounting)
1. Remove the stitching that secures the waistband end adjuster to the left wing flap.
2. Place a mark 1/8-inch from the flap/container seam. Place an additional mark on the lower edge
binding 2 ½-inches from the flap/container seam.
3. Position the AR2 Pocket on the outside of the left wing flap.
1/8-IN.
9 ½-IN.
2 ½-IN.
