TM 10-1670-287-23&P
0047 00
UNIT MAINTENANCE
MC-4 RAM AIR FREE-FALL PERSONNEL PARACHUTE SYSTEM
AR2 POWER CABLE ASSEMBLY INSTALLATION/MOUNTING
0047 00-1
THIS TASK COVERS:
Repair
Replace
Installation of AR2 Power Cable Assembly, Reserve
Installation of AR2 Power Cable Assembly, Main
Removal of AR2 Power Cable Assembly, Reserve
Removal of AR2 Power Cable Assembly, Main
INITIAL SETUP:
Tools
Bit, Drill, 5/32-IN. (Item 2, WP 0063 00)
Drill, Electric, 3/8-IN. (Item 14, WP 0063 00)
Punch, Center (Item 36, WP 0063 00)
Screwdriver, Phillips (Item 38, WP 0063 00)
Sewing Machine, Bartack, (42 stitch) (Table 1, WP 0015 00)
Sewing Machine, LD (Table 1, WP 0015 00)
Sewing Machine, MD (Table 1, WP 0015 00)
Sewing Machine, MD Zig-Zag (Table 1, WP 0015 00)
Stitch Removal Tool (Item 40, WP 0063 00)
Wrench, Adjustable, 6-IN. (Item 46, WP 0063 00)
Material Parts
AAD Junction Plate, Main (Item 15, WP 0071 00)
Alcohol, Isopropyl (Anhydrous) (Item 3, WP 0076 00)
Clamp (Item 10, WP 0071 00)
Cloth, Lint Free, Cleaning (Item 8, WP 0076 00)
Cloth, Duck, Textured Nylon, CG (Item 7, WP 0076 00)
Nut (Item 11, WP 0071 00)
Plate, Backing (Item 9, WP 0071 00)
Screw (Item 2, WP 0071 00)
Tape, Lacing and Tying (Item 33, WP 0076 00)
Tape, Nylon, Type III, ¾-IN. Wide (Item 37, WP 0076 00)
Thread, Nylon, Size E (Item 43/44, WP 0076 00)
Thread, Nylon, Size FF (Item 42, WP 0076 00)
Personnel Required
92R (10) Parachute Rigger
Equipment Condition
Layout on packing table or other
suitable area.
REPAIR
If loose or broken threads are present, restitch with size FF thread in accordance with this WP and WP
0015 00.
REPLACE
Replace damaged power cable sleeve as follows:
NOTE
If packed, unpack both main and reserve parachutes. Disconnect
main parachute. It is not required to disconnect reserve parachute.
