TM 10-1670-293-23&P
0027 00
5. Canopy release actuator, slide, assembly pin and lever assemblies. Replace as follows:
NOTE
Tool kit, Capewell or equal, will be used to disassemble the release
and install the replacement parts. Fasten to the edge of work
surface with screws furnished.
a. Install the female fitting on the holding tool and secure by closing the actuator and lever assembly.
Assure the head of the assembly pin is seated in the No. 1 die fitting.
Actuator and
Lever Assembly
0027 00-11
Change 1
