TM 10-1670-293-23&P
0028 00
UNIT MAINTENANCE
T-10C/T-10D TROOP BACK PARACHUTE ASSEMBLY
PACK TRAY
THIS TASK COVERS:
Repair
Replace
INITIAL SETUP:
Equipment Condition
Pack tray cleaned with all defects recorded.
Tools
Anvil, Chuck Fastener (Item 1, WP 0039 00)
Chuck (Item 5, WP 0039 00)
Cutter, Double-Bow, ½-inch (Item 6, WP 0039 00)
Cutter, Single-Bow (Item 7, WP 0039 00)
Holder, Die, Fastener (Item 11, WP 0039 00)
Knife, Hot Metal (Item 15, WP 0039 00)
Knife (Item 14, WP 0039 00)
Lead, Pig (Item 16, WP 0039 00)
Mallet, Rawhide (Item 18, WP 0039 00)
Pot, Melting (Item 25, WP 0039 00)
Sewing Machine, Darning (Table 1 WP 0012 00)
Sewing Machine, Light-Duty (Table 1 WP 0012 00)
Sewing Machine, Medium-Duty (Table 1 WP 0012 00)
Sewing Machine, Heavy-Duty (Table 1, WP0012 00)
Sewing Machine, Zig-Zag (Table 1, WP 0012 00)
Shears (Item 29, WP 0039 00)
Personnel Required
92R(10) Parachute Rigger
Materials/ Parts
Beeswax (Item 2, WP 0053 00)
Cloth, Duck, Nylon Type III (Item 8, WP 0053 00)
Fastener:
Cap (Item 5, WP 0053 00)
Post (Item 28, WP 0053 00)
Socket (Item 31, WP 0053 00)
Stud (Item 33, WP 0053 00)
Tape, Nylon Type III, ¾-inch (Item 41, WP 0053 00)
Tape, Lacing and Tying (Item 33, WP 0053 00)
Thread, Nylon, Size E (Item 47/44, WP 0053 00)
Thread, Nylon, Size 3 (Item 48/45, WP0053 00)
Wax, Paraffin (Item 50, WP 0053 00)
Webbing, Elastic, Cotton (Item 51, WP 0053 00)
Webbing, Nylon, Type IV (Item 52, WP 0053 00)
Webbing, Nylon, Type VI (Item 60, WP 0053 00)
Webbing, Nylon, Type VIII (Item 61, WP 0053 00)
Webbing, Nylon, Type XVII (Item 63, WP 0053 00)
References
Group No. 05, MAC (WP 0046 00)
WP 0012 00, WP 0039 00
TM 10-1670-299-20&P
REPAIR
Minor repairs to the pack tray of the T-10C/T-10D parachute consist of darning small holes (or tears), and
splicing edge binding.
1. Darning. There is no limit to the number of times the pack tray may be darned. Darn small holes or
tears that do not exceed ¾-inch in length or diameter; adapt procedure for darning from WP 0012 00.
2. Splicing edge binding. Splice as follows:
a. Cut a piece of type III nylon tape, long enough to extend 1-inch beyond each end of the damage.
b. Fold-under each end ¼-inch, center the binding over the damaged area, and stitch into place
0028 00-1
Change 1
