TM 10-1670-327-23&P
0006 00
Attach the Canopy Release Covers
NOTE
There is a right release cover and left release cover.
1. Open the canopy release cover plate (figure 5, item 1) on the canopy release assembly (CRA)
(figure 5, item 2).
2
1
Figure 5. Opening the Canopy Release Cover Plate
2. Orientate the right release cover and left release cover by ensuring that the yellow lanyard (figure 6,
item 1) is facing forward and the release cover attaching loop (figure 6, item 2) is facing upward.
3. Distinguishing the right release cover from the left release cover, insert the long tuck tab (figure 6,
item 3) so that is faces the inside and the short tuck tab (figure 6, item 4) so that it faces the outside.
0006 00-5
