TM 10-1670-327-23&P
0006 00
3
2
4
1
Figure 6. Orienting the Yellow Lanyard.
4. Open the release cover plate (figure 7, item 1) so that it is fully open and route the release cover
attaching loop (figure 7, item 2) through the top of the release cover plate (figure 7, item 1).
5. Ensure there are no twists in the release cover attaching loop (figure 7, item 2).
2
1
Figure 7. Routing the Release Cover Attaching Loop.
6. Grasp the yellow lanyard (figure 8, item 1) on the release cover (figure 8, item 2) and route through
the release cover loop (figure 8, item 3) and pull tight forming the girth hitch (figure 8, item 4) on the
canopy release cover plate (figure 8, item 2).
0006 00-6
