TM 10-1670-327-23&P
0015 00
8. Position the pack closing pin cover (figure 60, item 1) on the static line so that the opening is facing
away from the closing loop.
9.
Close top flap (figure 60, item 2) and secure with temporary pin (figure 60, item 3).
1
2
3
Figure 60. Closing the Pack Tray (continued).
10. Pull out the static line until the bottom of the cotton protective sleeve (figure 61, item 1) is aligned
with the edge of the top flap (figure 61, item 2).
11. Pull up on the pull up cord (figure 61, item 3) and remove temporary pin. Turn static line 1/2-turn
exposing the curved pin (figure 61, item 4) and insert curved pin left to the right through closing loop
(figure 61, item 5). Curved pin will face counterclockwise.
12. Rigger Check number 6.
13. Route the pullup cord under the curved pin and remove pullup cord.
14. Close the pin protector flap and secure it in the tuck flap (figure 61, item 6).
15. Dress the pack tray.
0015 00-40
