TM 10-1670-327-23&P
0015 00
17. Continue to alternate stows from right to left until approximately 8 to 10 inches of suspension lines are
remaining (figure 51, item 1).
1
Figure 51. Continuing to Alternate Stows.
18. Remove connector links (figure 52, item 1) from the tension plate.
1
Figure 52. Removing Connector Links from Tension Plate.
19. Fold excess slack from the suspension lines from the remaining suspension lines over the stowed
suspension lines.
NOTE
There should be a minimum of 8 stows in each panel. Ensure that all packing aids are removed.
0015 00-35
