TM 10-1670-327-23&P
0015 00
Close the Pack Tray
1. With the right hand, hold the risers (figure 55, item 1) in place next to the canopy release assembly.
With the left hand grasp the edge of the pack tray (figure 55, item 2). Slide the pack tray forward
beyond halfway up the risers. Spread the pack tray flaps (figure 55, item 3).
2. Slide the risers onto the pack tray, V-fold the risers onto the pack tray (figure 55, item 4).
3. While holding the folded risers in place, grasp the static line at the end of the deployment bag, and
rotate onto the pack tray (figure 55, item 5).
1
2
3
4
6
8
9
7
5
Figure 55. Closing the Pack Tray.
NOTE
Ensure that the closing loop is not routed over the static line.
0015 00-37
