TM 10-1670-327-23&P
0049 00
REPLACE continued
5. Adjust harness so that it is set properly.
6. Secure the horizontal back strap (figure 4, item 1) by routing both horizontal back strap retainers
(figure 4, item 2) over the horizontal back strap (figure 4, item 1) and through the horizontal back
strap keepers (figure 4, item 3) and back over the back strap keeper (figure 4, item 3) securing the
snap fasteners (figure 4, item 4).
7. Secure the diagonal back straps (figure 4, item 1) to the pack tray (figure 4, item 2) by routing the
tuck tabs on the diagonal back strap keepers (figure 4, item 3) through the sizing channels (figure 4,
item 4) on the diagonal back strap (figure 4, item 5).
4
2
3
3
1
Figure 4. Securing Horizontal Back Strap and Attaching Diagonal Back Straps.
8. Route the long tuck tab (figure 5, item 1 ) (snap fastener attached) through the sizing channel
(figure 5, item 2), then route the short tuck tab (figure 5, item 3) into the sizing channel (figure 5,
item 2) between the long tuck tab (figure 5, item 1) sizing channel (figure 5, item 2).
9. Close snap fastener (figure 5, item 4) and secure (figure 5, item 5).
10. Repeat procedure for opposite side.
0049 00-3
