TM 10-1670-327-23&P
UNIT MAINTENANCE
MC-6 PERSONNEL PARACHUTE SYSTEM
NSN 1670-01-527-7537
HARNESS ASSEMBLY
REPLACE
INITIAL SETUP:
Tools
Personnel Required
None required.
92R (10) Parachute Rigger
Materials/Parts
Equipment Condition
None required.
Lay out on packing table or other suitable area.
NOTE
If harness is not attached to the pack tray, start with step 4, layout pack tray with
attaching points facing up.
REPLACE
1. Layout the pack tray (figure 1, item 1) and harness (figure 1, item 2) assembly on the pack table
with the harness assembly facing up.
2. Remove the harness (figure 1, item 2) from the pack tray (figure 1, item 1) by unsnapping the upper
sizing channel keepers (figure 1, item 3) and remove the tuck tabs (figure 1, item 4) from the
diagonal back strap sizing channels (figure 2, item 5) on both the left and right.
3
2
4
5
1
Figure 1. Pack tray and Harness.
0049 00-1
