TM 10-1670-327-23&P
UNIT MAINTENANCE
MC-6 PERSONNEL PARACHUTE SYSTEM
NSN 1670-01-527-7537
HARNESS DIAGONAL GUIDE
REPLACE
INITIAL SETUP:
Tools
Personnel Required
Sewing Machine, Light Duty (Item 56, WP 0097
92R (10) Parachute Rigger
Shears (Item 61, WP 0097 00)
Knife, Hot, Metal (Item 27, WP 0097 00)
Materials/Parts
Equipment Condition
Webbing, Nylon, Type XII (Item 57, WP 0109 00)
Lay out on packing table or other suitable area.
Thread, Nylon, Size E (Item 51, WP 0109 00)
REPLACE
Replace Harness Diagonal Guide
1. Remove damaged diagonal guide by cutting with shears.
2. Cut two pieces of type XII nylon webbing 5-1/4-inch long using the hot knife. Lay one piece over the
other as shown in figure 1. The short sides are over lapped by 1/2-inch.
Figure 1. Replacing Harness Diagonal Guide.
0050 00-1
