TM 10-1670-327-23&P
0048 00
REPLACE - continued
4. Hand or foot operated press method. Installation of a snap fastener assembly by hand or foot
operated press (figure 2, item 1) may be accomplished using the procedures in step 3., above,
except one uses the hand or foot to press the two pieces together, and the chuck (figure 2, item 2)
and die (figure 2, item 3) will be secured within the applicable press assembly using the available
locking screws (figure 2, item 4).
1
4
2
3
4
Figure 2. Hand or Foot Operated Press Method.
END OF WORK PACKAGE
0048 00-3/(4 Blank)
