TM 10-1670-265-12&P
T.O. 13C7-1-21
SECTION VI.
MAINTENANCE PROCEDURES FOR 57-FOOT-LONG CENTER LINE
4-12. Center line - Inspect.
4-12
This task covers: Inspection
INITIAL SETUP
NOTE
Personnel Required:
The instructions pertain to the functional group
43E (10) parachute rigger
number sequence 01 in the MAC and the RPSTL.
Reference Information:
TM 10-1670-201-23 T.O. 13C-1-41
INSPECTION
1. Foreign material and stains inspection. Inspect for the presence of dirt or similar type foreign material. Also check for
evidence of mildew, moisture, oil, grease, pitch, resin, or contamination by salt water.
2. Detailed inspection. Inspect for breaks, burns, cuts, frays, holes, snags, tears, incorrect weaving, and sharp edges
formed from searing; loose missing or broken stitching, tacking, whipping, and weaving; weak spots, wear, and
END OF TASK
4-5
