TM 10-1670-268-20&P 0012 00
0012 00-2
2. Using either a ¾-inch wrench or socket, remove each side rail bolt (2) and flat washer (3).
3. Remove bushing (6) by sliding to either end of side rail (1) and pulling out.
4. Using some mechanism of support for the side rail, be it personnel or equipment; remove side
rail/outboard roller pad bolts (4) and flat washers (5) securing each side rail (1) to platform using a
9/16-inch wrench or socket.
5. Remove side rail.
WARNING
The type V and dual row airdrop platform weight will vary. Refer to
WP 0002 00. To avoid injury to personnel, use extreme caution in
lifting and handling. Never walk near or crawl beneath raised
platforms.
5
4
6
1
3
2
