TM 10-1670-201-23
T.O. 13C-1-41
NAVAIR 13-1-17
c. Multiple Section Replacement. If two or more
adjacent sections within a bias-constructed gore require
replacement. cut and remove all affected sections,
including the joining diagonal seams as prescribed in
paragraph a above. Prepare the material for the
replacement sections and join the replacement sections
together with 1/2-inch-wide lapped seams (fig. 3-18).
Install the joined replacement sections using the
applicable procedures in paragraph a above.
Figure 3-18. Lapped seams completed for multiple
gore section replacement, typical.
3-34
