TM 10-1670-201-23
T.O. 13C-1-41
NAVAIR 13-1-17
Figure 3-29. Parachute inspection data pocket
stitching attachment details, typical.
3-28. Parachute Harness Quick Release Assembly.
The parachute harness quick release assembly (fig.
A-21 airdrop cargo bag is a metal device which permits
quick removal of the parachute harness or cargo sling
after the parachutist or cargo load reaches the ground.
Repair or replacement of a parachute harness quick
release assembly will be performed using the following
procedures, as applicable.
a. Repair. A parachute harness quick release that
does not function properly, is damaged or dirty, or has
Figure 3-28. Parachute inspection data pocket
been immersed in water will be repaired as follows:
tacking details, typical.
(1) Removal from harness or sling assembly.
(a) If applicable, remove the safety clip
(2) Stitching. A pocket that is to be secured
with stitching will be stitched according to original
installation details and figure 3-29. Stitching will be
made in accordance with paragraph 3-9, using the
stitching specifics cited in the applicable item equipment
publication.
3-47
