EXTRACTION LINE PANEL PROCEDURES FOR C-17 GLOBEMASTER III 0015 00
STOWING 160-FOOT ONE LOOP EXTRACTION LINE TO EXTRACTION LINE
PANEL WITH EXTRACTION BRIDLE ATTACHED
0015 00-9
b. Cut one 95-inch length of ½-inch tubular nylon. Cut one 95-inch length and six 10-inch lengths of
type I, ¼-inch cotton webbing to be used as bag closing ties.
c. Beginning at the upper left corner of panels, secure one end of the 95-inch, ½-inch tubular nylon
bag closing tie to the lacing loops located on the outside corner of the top and bottom panels with
three alternation half hitches and an overhand knot in the running end.
d. Using the running end of the 95-inch closing tie, lace panels closed, working from bottom to top
and left to right, forming half hitches between closing loops. Secure running end of bag closing tie
with three alternating half hitches and an overhand knot in the running end. Trim excess (figure 10).
Figure 10. Extraction Line Bag Closed.
e. Using 10-inch lengths of type I, ¼-inch cotton webbing, secure both top and bottom side-closing
loops together on the left and right sides. Secure ties with a surgeon’s knot and locking knot.
95 IN Bag
Closing Tie
