TM 10-1670-327-23&P
0015 00
3
2
1
Figure 39. Final Long-folding Steps.
TYING THE STATIC LINE TO THE VENT LOOP OF THE CANOPY
Before stowing canopy into the deployment bag, the canopy must be attached at the vent loop to the
deployment bag. Proceed as follows:
1. Roll back sides of the deployment bag (figure 40, item 1) until the static line buffere loop is exposed.
2. Secure the canopy vent loop to the static line bufffer loop using a double 36-inch length of Type I, 1/4-
inch cotton webbing (figure 40, item 2). Pass one end of the double webbing through the static line
buffer loop (figure 40, item 3), through the vent loop of the canopy (figure 40, item 4), and back
through the static line buffer loop.
2
4
3
1
Figure 40. Securing Main Canopy Bridle Loop To Girth Hitch of Static Line.
0015 00-28
